SEE Tracker Entries

Active Tasks
Albany |  Grand Forks |  Rosemount |  Wells |  Field (Wells) |  Midwest
 Name LocationSite Area Date Ttl Safety Topic Root Causes Status Respirator User Name Completion DateEntry
C.J. MeyerMidwest Wells FS2402/01/20226Ergonomics

The FS24 crew ran 4 strand down the form that was cut for a different form.

Needs AttentionView / Edit Details
Riley KloosMidwest Wells West Plant01/06/20227Fall Hazard

One of the "legs" used to hold the rails when they are down is broken. Good awareness by the crew or else the steel rail could have fell to the floor and possibly injured employees and caused damage to the rail itself.

Needs AttentionView / Edit Details
Brian SchultzeMidwest Wells building 311/12/20216Fall Hazard

Wood on the 8017 trailer is missing see pictures

Needs AttentionView / Edit Details
Brian SchultzeMidwest Wells building 303/29/20226Fall Hazard

2 floor panels off the FS39 had no wood covers for the openings today. So the patch crew can put them of.

Needs AttentionView / Edit Details
Brian SchultzeMidwest Wells Building 312/09/20216Fall Hazard

A DT8 panel came out today. The wood was coving the hole but a corner was pop up.

Needs AttentionView / Edit Details
Chas JacobsonMidwest Wells Bridge Building DT901/20/20227Fall Hazard

Catwalk mesh is not welded down everywhere, area on West side near where fire was that angle iron came apart from itself. Tripping hazard.

Needs AttentionView / Edit Details
corey olsonMidwest Wells New Batch Plant12/03/20218Fall Hazard

Pit in the center of the new batch plant is not blocked off with cones or caution tape. I have put this in place several times and the contractors remove and do not put back up.

Needs AttentionView / Edit Details
Brian SchultzeMidwest Wells Burning pit behind building 412/09/20214General Communication

Corey, I want to make sure the burning pit behind building 4 is done using it. I see someone is dumping more wood back there.

Needs AttentionView / Edit Details
corey olsonMidwest Wells West Plant10/14/20216Housekeeping

Rigging for the new crane ways is scattered all over the floor on the south end of the building.

Needs AttentionView / Edit Details
Todd A AndersonMidwest Wells DT -1001/04/20224Housekeeping

Left over concrete not cleaned up after pouring new abutment for the DT-10.

Needs AttentionView / Edit Details
Brady KMidwest Wells B501/11/20227Housekeeping

there are cable laying along the B5 and running down the walking ramp next to the B5 creating a tripping hazard

Needs AttentionView / Edit Details
Julio AmbrizMidwest Wells FS2412/13/20218Housekeeping

Blowing of bed with out using The vacuum first.

Needs AttentionView / Edit Details
Chas JacobsonMidwest Wells Main Plant, room near Beam form12/06/20213Housekeeping

Is the water bottle on the door a legitimate form of sharps disposal?

Needs AttentionView / Edit Details
Brian SchultzeMidwest Wells East side of Bridge Building01/17/20224Housekeeping

Cable cut sticking out from the cable trailer.

Needs AttentionView / Edit Details
C.J. MeyerMidwest Wells West plant12/06/20216Housekeeping

I have seen more than 5 candy wrappers on the ground and on forms.

Needs AttentionView / Edit Details
Ron BarnickMidwest Wells Bathroom12/01/20213Housekeeping

Bathrooms are a pig pen. Can't expect Loren to clean if people are just being lazy throwing stuff on the floors. Also chew spit all over.

Needs AttentionView / Edit Details
gerald asmusMidwest Wells west plant05/17/20226Housekeeping

employees are leaving scrap steel on the floor around chop saw. slip-trip hazard

Needs AttentionView / Edit Details
Todd A AndersonMidwest Wells B-501/19/20225Housekeeping

Floor around form needs to be cleaned up.

Needs AttentionView / Edit Details
Todd A AndersonMidwest Wells Out side QC lab01/28/20227Housekeeping

The parts that need to be painted for the metal shop are next to the C-5 form and are creating a tripping hazard. Can they be moved back into the metal shop to be painted?

Needs AttentionView / Edit Details
Corey OlsonMidwest Wells Carp. shop12/03/202112Other

Chris Musser tested positive for COVID

Needs AttentionView / Edit Details
C.J. MeyerMidwest Wells West Batch Plant01/07/20226Other

The water hose is froze that we use to wash tools after pouring.

Needs AttentionView / Edit Details
Ron BarnickMidwest Wells Steel shop/ plant12/28/20218Other

Just wondering why we don't follow our tobacco use policy? There are puddles of spit in the bathrooms and you can plainly see who chews....

Needs AttentionView / Edit Details
Ron BarnickMidwest Wells steel shop/ outside12/28/20217Other

No sand has been spread outside the office and steel shop area's. Its been ice for a day and a half.

Needs AttentionView / Edit Details
Brian SchultzeMidwest Wells building 410/20/202110Other

The overhead doors on both side of bay 2 are down until the door company come fix them. We are down to one acid bay for now.

Needs AttentionView / Edit Details
Brady KMidwest Wells Main Plant12/14/20217Other

Fire Extinguishers in Main Plant do not have monthly inspection tags filled out, which are required by NFPA 10 standards

Needs AttentionView / Edit Details
 Name LocationSite Area Date Ttl Safety Topic Root Causes Status Respirator User Name Completion DateEntry