SEE Tracker Entries
| Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Nick bjerke | Midwest | Field | Field | 10/27/2021 | 0 | Safe Operation | Welding on multi level structures and fire hazards on each level. Move any flammable objects have fire watch on each level if welding on top floor | Completed | 10/27/2021 | View / Edit Details | |
| C.J. Meyer | Midwest | Wells | FS24 | 10/26/2021 | 6 | General Communication | The 1/2" cable reel had 2 I.D. tags on it. | Completed | 10/26/2021 | View / Edit Details | |
| Mike Frieler | Midwest | Albany | Blue Stressing Jack | 10/27/2021 | 6 | Other | One of the prongs on the cord plug was loose. | Completed | 10/27/2021 | View / Edit Details | |
| Ryan Paulouski | Midwest | Field | 419220 Empirical Foods | 10/27/2021 | 3 | General Communication | Another trade took one of our ladders down in order to accomplish their task. This ladder was Wells only access point to level 1. If there was an emergency causing us to vacate level 1 in a hurry, our missing ladder wouldn't of allowed us to do so. | Completed | 10/27/2021 | View / Edit Details | |
| Nate kuiper | Midwest | Wells | Fs 22 24 | 10/27/2021 | 8 | Unsafe Operation | Multiple people from different crews holding the face shield instead of wearing it properly while cutting cable | Completed | 10/27/2021 | View / Edit Details | |
| Iain Smith | Mountain States | West Division Plant | Indoor production | 10/27/2021 | 7 | Housekeeping | Strand pack too close to exit door by FS6 | Completed | 10/27/2021 | View / Edit Details | |
| Shelly Pourchot | Great Lakes | Crystal Lake - Production | Walls Bed 2 | 10/26/2021 | 5 | PPE | Observed an employee without safety glasses on bed. | Completed | 10/27/2021 | View / Edit Details | |
| Geoff Norrena | Mountain States | West Division Plant | outside of plant | 10/27/2021 | 4 | Unsafe Act | Forklift left with elevated forks | Completed | 10/27/2021 | View / Edit Details | |
| Frank caballero | Mountain States | West Division Field | Medtronics | 10/21/2021 | 0 | Safe Operation | The guy is doing a good job in traffic control Moving Boom lift they always have somebody watching when they travel | Completed | 10/21/2021 | View / Edit Details | |
| Frank caballero | Mountain States | West Division Field | Medtronics | 10/27/2021 | 9 | Housekeeping | Dumping grout on the ground need to be put into eco pan or dumpster will be talking to grout crew about this | Completed | 10/27/2021 | View / Edit Details | |
| Corey Olson | Midwest | Wells | QC | 10/28/2021 | 12 | Other | Nate Kuiper is being tested for COVID | Completed | 11/01/2021 | View / Edit Details | |
| Corey Olson | Midwest | Wells | B5 | 10/27/2021 | 6 | Ergonomics | employee did not use portable steps to get off of the form. | Completed | 10/27/2021 | View / Edit Details | |
| Corey Olson | Midwest | Wells | Yard | 10/25/2021 | 7 | Unsafe Operation | yard driver did not have headlights on semi | Completed | 10/25/2021 | View / Edit Details | |
| Corey Olson | Midwest | Wells | New Batch Plant | 10/27/2021 | 8 | Unsafe Operation | contractor working in scissor lift did not have safety chain closed. | Completed | 10/27/2021 | View / Edit Details | |
| Corey Olson | Midwest | Wells | Office | 10/25/2021 | 12 | Other | Randy Mcgowan tested positive for COVID | Completed | 10/25/2021 | View / Edit Details | |
| Terry Braun | Great Lakes | Valders - Production | Hollowcore plant 2 | 10/27/2021 | 3 | Other | Terry reported a newer employee moving a grout bucket moved it into the way of another worker. | Completed | 10/28/2021 | View / Edit Details | |
| Phyllis Felsinger | Midwest | Albany | Prod. Floor | 10/13/2021 | 5 | Other | Ladders storage should require restraint. | Needs Attention | View / Edit Details | ||
| Phyllis Felsinger | Mountain States | West Division Plant | Yard around office | 10/27/2021 | 0 | Safe Operation | Following a big windstorm insulation and other materials were blown about the property. Three employees were cleaning up the debris. Thank you and great job! | Completed | 10/27/2021 | View / Edit Details | |
| Phyllis Felsinger | Midwest | Rosemount | Production Area | 10/15/2021 | 6 | Housekeeping | Areas outside the exit doors have debris, materials and tools (sprayers, stuff) lying outside the emergency exits. | Needs Attention | View / Edit Details | ||
| Mike Pingle | Great Lakes | Valders - Production | Hollowcore - Plant 1 | 10/28/2021 | 3 | Other | Rabbit bumped him in the foot. The bar that stops and starts the rabbit is loose and needs maintenance. | Completed | 10/28/2021 | View / Edit Details | |
| Iain Smith | Mountain States | West Division Plant | Acid Wash Pad | 10/28/2021 | 10 | Housekeeping | Scrap mesh and strand directly outside exit door | Needs Attention | View / Edit Details | ||
| Nick bjerke | Midwest | Field | Field | 10/28/2021 | 0 | Safe Operation | A fixed ladder for access needs to be tied off and be above the opening 3-4 rungs ,good job | Completed | 10/28/2021 | View / Edit Details | |
| mike kautzer | Great Lakes | Valders - Production | carpenter shop | 10/27/2021 | 6 | Ergonomics | carpenters needed fatigue mats to work on at their benches | Completed | 10/28/2021 | View / Edit Details | |
| Phyllis Felsinger | Mountain States | West Division Plant | Machine Shop - Rebar Bender | 10/28/2021 | 9 | Other | When following up on our recent rebar amputation, I checked out the Rebar Bender area. I was looking for a posting / guidance that instructs our four employees on the corrective action taken. Specifically, I was looking for the hook that would be used to grab the stirrups and like products rather than using the hands. I was unable to locate the hook and find any reference to this process. I stopped Jacob and showed me where the hook was stored - behind a workbench with only the end of the hook being visible. | Needs Attention | View / Edit Details | ||
| Phyllis Felsinger | Mountain States | West Division Plant | Warehouse | 10/28/2021 | 6 | Other | I observed two 16 AWG gauge home style extension cords connected together to power a light of other equipment. This type of extension cord does not have the capability of grounding and not suggested for use in an industrial situation. I've included a link that show the extension cord use. https://www.amazon.com/EPICORD-Indoor-Extension-Outlet-Tamper/dp/B07FDBQZPK/ref=asc_df_B07FDBQZPK/?tag=hyprod-20&linkCode=df0&hvadid=416771199824&hvpos=&hvnetw=g&hvrand=12976124438608838686&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9028921&hvtargid=pla-872813514635&psc=1&tag=&ref=&adgrpid=96633969569&hvpone=&hvptwo=&hvadid=416771199824&hvpos=&hvnetw=g&hvrand=12976124438608838686&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9028921&hvtargid=pla-872813514635 | Needs Attention | View / Edit Details | ||
| Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |