SEE Tracker Entries
Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |
---|---|---|---|---|---|---|---|---|---|---|---|
NA | Great Lakes | Crystal Lake - Production | n1 | 06/24/2021 | 3 | Ergonomics | na | Completed | 06/24/2021 | View / Edit Details | |
corey olson | Midwest | Wells | FS 20 | 07/06/2021 | 6 | Ergonomics | James Rivera jumped off of the side of the form. Steps were 2' away from where he was. | Completed | 07/06/2021 | View / Edit Details | |
C.J. Meyer | Midwest | Wells | FS 24 | 07/07/2021 | 6 | Ergonomics | A crew member put a strand that was cut for a shorter bed in the FS24. This seems to happen way too often which is a huge waste of time. There has to be a better way of separating these strand so they get put in to the right bed they are cut for. | Completed | 07/08/2021 | View / Edit Details | |
Marc Stayner | Great Lakes | Valders - Production | Plant 3 | 07/10/2021 | 3 | Ergonomics | A second vibratory screed was purchased for plant 3 and it doesn't have any cushion for the grips. | Completed | 07/10/2021 | View / Edit Details | |
Corey Olson | Midwest | Wells | Building 3 | 07/14/2021 | 6 | Ergonomics | Abel Mendoza jumped off of the end of a semi trailer in the patch building | Completed | 07/14/2021 | View / Edit Details | |
corey olson | Midwest | Wells | FS 23 | 07/16/2021 | 6 | Ergonomics | employee jumped off of side of the form. Stairs were close. | Completed | 07/16/2021 | View / Edit Details | |
Tyler Antil | Midwest | Albany | FS-17 | 07/19/2021 | 6 | Ergonomics | employee trying to flip angle iron over by hand | Completed | 07/19/2021 | View / Edit Details | |
corey olson | Midwest | Wells | Fs 26 | 07/26/2021 | 6 | Ergonomics | Spoke to Evan Linder about using steps to access the form. | Completed | 07/26/2021 | View / Edit Details | |
Logan Hemberger | Mountain States | West Division Field | Gaston steam plant Alabama | 07/27/2021 | 9 | Ergonomics | Afternoon rain showers caused standing water on the slab. Be aware of slips | Completed | 07/27/2021 | View / Edit Details | |
Jordan Johnson | Midwest | Wells | West Plant | 07/29/2021 | 7 | Ergonomics | The FS 25 crew had the stairs along the bed while pouring but I witnessed two different employees just off the form and not use them. | Completed | 07/30/2021 | View / Edit Details | |
corey olson | Midwest | Wells | fs 19 | 08/13/2021 | 6 | Ergonomics | Employee Arthur Luna not using steps to get on form. | Completed | 08/13/2021 | View / Edit Details | |
corey olson | Midwest | Wells | Metal Shop | 08/10/2021 | 6 | Ergonomics | Employee, Keith Niebuhr, not doing stretching with crew. Just watching | Completed | 08/10/2021 | View / Edit Details | |
corey olson | Midwest | Wells | FS 26 | 08/13/2021 | 3 | Ergonomics | Brevin Linder, running through the plant to go get a tool. | Completed | 08/13/2021 | View / Edit Details | |
Michelle | Midwest | Rosemount | Production | 08/18/2021 | 7 | Ergonomics | Employee was pulling cables and felt a faint pain in lower back. | Completed | 08/18/2021 | View / Edit Details | |
Todd | Midwest | Rosemount | Production | 08/18/2021 | 6 | Ergonomics | Employee was raking the concrete across the form and twisted his back. Felt a pain down his side | Completed | 08/18/2021 | View / Edit Details | |
C.J. Meyer | Midwest | Wells | FS 22 and 23 | 08/19/2021 | 6 | Ergonomics | Sal and his crew had their bed set up and waiting for mud. He and his crew went to help the FS 23 to help with their set-up to help keep everything moving along. | Completed | 08/19/2021 | View / Edit Details | |
TEST DELVECCHIO | Mountain States | West Division Field | TEST DELVECCHIO | 08/02/2021 | 3 | Ergonomics | TEST DELVECCHIO | Completed | 08/03/2021 | View / Edit Details | |
Marc Stayner | Great Lakes | Valders - Production | Maintenance Area | 06/02/2021 | 7 | Ergonomics | An employee had to crawl and stand on a truck tire to work on the top of the engine. The employee could easily slip and fall off this tire. | Needs Attention | View / Edit Details | ||
Josh Demant | Great Lakes | Crystal Lake - Production | TT Bed | 06/03/2021 | 7 | Ergonomics | An employee was observed using a wheel barrow where the handle had been broke off and was repaired using a C Clamp. | Needs Attention | View / Edit Details | ||
corey olson | Midwest | Wells | FS 25 | 08/31/2021 | 6 | Ergonomics | Added steps to the side of the form. | Completed | 08/31/2021 | View / Edit Details | |
Chuck Gilkey | Mountain States | West Division Field | Medtronics | 11/16/2021 | 9 | Ergonomics | Esteban Reyna tripped on a lifting eye and fell to his knees. His knees are sore but says he is ok | Needs Attention | View / Edit Details | ||
Joe Larson | Midwest | Field | Bower residence | 09/01/2021 | 8 | Ergonomics | lots of grinding on a panel at bower residence due to panel placement. arms and hands numb and had to take multiple breaks. still affecting me to this day. lots of jobs require grinding-cutting with small hand held grinders. talked to tom peterson on december 1 about ongoing issues and told me to fill out a see report. i have pictures on my phone of the work we were doing and cant get to this. hands and arms go numb at random times and when grinding, cutting and other tasks | Completed | 09/02/2022 | View / Edit Details | |
corey olson | Midwest | Wells | FS 26 | 12/10/2021 | 6 | Ergonomics | No steps being used on form. | Completed | 12/10/2021 | View / Edit Details | |
Moises Lopez | Mountain States | West Division Plant | East of South Alar | 10/25/2021 | 9 | Ergonomics | Oil spill under finishing truck | Needs Attention | View / Edit Details | ||
Corey Olson | Midwest | Wells | B5 | 10/27/2021 | 6 | Ergonomics | employee did not use portable steps to get off of the form. | Completed | 10/27/2021 | View / Edit Details | |
Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |