SEE Tracker Entries
Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |
---|---|---|---|---|---|---|---|---|---|---|---|
Rick Tolfa | Great Lakes | Waukesha - Machinery | Machine shop | 04/19/2022 | 4 | Housekeeping | Area was messy with several trip and slip hazards on the floor | Completed | 04/20/2022 | View / Edit Details | |
Jeff Stenzel | Midwest | Wells | FS19 | 04/19/2022 | 7 | Housekeeping | EE were blowing sanding dust off the form | Completed | 04/19/2022 | View / Edit Details | |
Rob weiss | Midwest | Field | Green Bay Wi | 04/18/2022 | 12 | Unsafe Operation | Wells driver unchained load before he was in place to pick | Completed | 04/18/2022 | View / Edit Details | |
John Schnell | Great Lakes | Valders - Production | Plant 3 | 04/18/2022 | 8 | Unsafe Operation | Employee was bringing in a pallet of rebar in the west center door to place next to the bed for the next days production. While bringing the long bars in they had to lift the load high enough to clear the stressing guards on the west end of beds 2 and 3. Because there were 2 pump sprayers left in the center of the drive isle the forklift operator dismounted the forklift to move the sprayers so they could drive down the isle. When they dismounted the forklift they left the load about 9 feet high and partially walked under it to move the sprayers | Completed | 04/19/2022 | View / Edit Details | |
Todd A Anderson | Midwest | Wells | FS-26 | 04/18/2022 | 4 | Unsafe Act | Cable not shielded on the south end of bed. | Completed | 04/19/2022 | View / Edit Details | |
Jordan Johnson | Midwest | Wells | FS23 | 04/13/2022 | 7 | Other | The crew didn't have their cable shielded at the end of the form. | Completed | 04/14/2022 | View / Edit Details | |
Jon bodart | Great Lakes | Valders - Production | bed 1 | 04/12/2022 | 6 | Housekeeping | dust pile at end of bulkhead was not vacuumed up, when detentionng the dust ignited from the torch | Completed | 04/12/2022 | View / Edit Details | |
Jon bodart | Great Lakes | Valders - Production | bed 4 | 04/11/2022 | 5 | Housekeeping | extra 9 bar has been on floor since Wednesday...need to get out of plant, poses a trip hazard | Completed | 04/11/2022 | View / Edit Details | |
Wayne W Wallander | Great Lakes | Valders - Field | Green Bay, Wisconsin | 04/11/2022 | 4 | Unsafe Operation | Pc shifted on load during rotation to vertical damaging forklift coant reserve tank, truck unable to align with crane after crane move. Tag line tie off will be used until conditions improve | Completed | 04/11/2022 | View / Edit Details | |
Marc stayner | Great Lakes | Valders - Production | Bar shop | 04/11/2022 | 6 | PPE | Employee was using a cutting torch without a face shield. | Completed | 04/12/2022 | View / Edit Details | |
Marc stayner | Great Lakes | Valders - Production | Bar shop | 04/11/2022 | 0 | Safe Operation | The housekeeping in the bar shop was very good yesterday. | Completed | 04/12/2022 | View / Edit Details | |
Marc stayner | Great Lakes | Valders - Production | Parking lot | 04/11/2022 | 3 | Unsafe Operation | An employee parked his car In The middle of the parking lot where he could possibly be hit. | Completed | 04/12/2022 | View / Edit Details | |
Jon bodart | Great Lakes | Valders - Production | yard | 04/08/2022 | 4 | Housekeeping | strand laying in runway | Completed | 04/08/2022 | View / Edit Details | |
Jon bodart | Great Lakes | Valders - Production | bed 3 | 04/08/2022 | 7 | Other | 1 safety latch on a rolling block is broke off | Completed | 04/08/2022 | View / Edit Details | |
Matt Maguet | Midwest | Wells | FS22 | 04/08/2022 | 3 | General Communication | The FS22 was tensioning strand and did not have the safety light on at the south end of the form. | Completed | 04/08/2022 | View / Edit Details | |
Jon bodart | Great Lakes | Valders - Production | qc lab | 04/07/2022 | 3 | Other | buckets of stone in doorway | Completed | 04/07/2022 | View / Edit Details | |
Danny Sheetz | Mountain States | West Division Plant | Steel Shop | 04/07/2022 | 0 | Safe Operation | Employee was grinding off strong backs using all proper PPE. | Completed | 04/07/2022 | View / Edit Details | |
Brady K | Midwest | Wells | DT7 | 04/07/2022 | 5 | Unsafe Act | Torch tank valves were left open when the torch was not being used. | Completed | 04/07/2022 | View / Edit Details | |
Eric N | Choose your Division | Hollowcore | 04/06/2022 | 6 | Unsafe Act | Forklift operator ran over the torch hose | Completed | 04/11/2022 | View / Edit Details | ||
Jon bodart | Great Lakes | Valders - Production | mixer room | 04/05/2022 | 5 | Unsafe Act | no cones around loader when chipping mixerc | Completed | 04/05/2022 | View / Edit Details | |
kristian zapata | Mountain States | West Division Plant | load out | 04/05/2022 | 8 | Other | One of my operators called me over to look at a DT that he was going to load that had a different piece mark on the tag vs the sticker. | Completed | 04/05/2022 | View / Edit Details | |
Matt Maguet | Midwest | Wells | FS22 | 04/05/2022 | 6 | Unsafe Act | While pouring, a newer employee climbed up onto the rail while raking. He then jumped back down. | Completed | 04/05/2022 | View / Edit Details | |
KRISTIAN ZAPATA | Mountain States | West Division Plant | load out | 04/05/2022 | 0 | Safe Operation | Crew has completed restacking product in row-1. | Completed | 04/05/2022 | View / Edit Details | |
Riley Kloos | Midwest | Wells | FS25 | 04/05/2022 | 5 | Other | Doing the haunch testing on the second day, the jack/rigging combination had malfunctioned and I didn't feel safe proceeding with the testing. | Completed | 04/05/2022 | View / Edit Details | |
Steve Arndt | Midwest | Wells | West Plant - FS24 | 04/04/2022 | 6 | Unsafe Act | Breven Linder not using stairs to step off of the FS24. | Completed | 04/04/2022 | View / Edit Details | |
Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |