SEE Tracker Entries
| Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Danny Sheetz | Mountain States | West Division Plant | FB1 | 04/21/2022 | 12 | Housekeeping | Flammable aerosal cans were left out on the ground to be run over and left in plate baskets. | Needs Attention | View / Edit Details | ||
| Robert C | Midwest | Wells | Patch building 3 | 04/27/2022 | 7 | Unsafe Act | Three 4x4 mock-ups not secured properly. Someone used one chain to secure three 4x4 mock-ups to sample trailer | Completed | 04/27/2022 | View / Edit Details | |
| Riley Kloos | Midwest | Wells | North Extension of Main Plant | 04/26/2022 | 4 | Ergonomics | A concrete saw needs to be used to cut off part of the apron on the north side of the main plant and bridge building in order to regrade that area as part of our yard improvements. | Completed | 04/26/2022 | View / Edit Details | |
| Riley Kloos | Midwest | Wells | FS25 | 04/05/2022 | 5 | Other | Doing the haunch testing on the second day, the jack/rigging combination had malfunctioned and I didn't feel safe proceeding with the testing. | Completed | 04/05/2022 | View / Edit Details | |
| Riley Kloos | Midwest | Wells | FS25 | 04/04/2022 | 5 | Other | When testing haunches for R&D purposes, one end of the beam slipped off the support causing it to slip. We always made sure that the area was clear when the haunches were being tested. No one was hurt and no property/equipment was damaged. | Completed | 04/04/2022 | View / Edit Details | |
| Riley Kloos | Midwest | Wells | FS22 | 04/01/2022 | 6 | Unsafe Act | The gates of the FS22 were open after strand was pulled. With these gates the residual strand does not need to be shielded, as long as they are closed. | Completed | 04/01/2022 | View / Edit Details | |
| Matt Maguet | Midwest | Wells | FS26 | 04/22/2022 | 6 | Unsafe Act | Andrew Haas walked underneath a full bucket of concrete. | Completed | 04/22/2022 | View / Edit Details | |
| Matt Maguet | Midwest | Wells | FS26 | 04/22/2022 | 6 | Other | They started putting the incorrect burkes in to the panels. They were using the 6-ton lifters that do not have the "foot" on them. | Completed | 04/22/2022 | View / Edit Details | |
| C.J. Meyer | Midwest | Wells | By the QC lab | 04/21/2022 | 7 | Unsafe Operation | Someone put a gas can in front of the electrical box, (Within the 3' that is supposed to be free and clear of anything) | Completed | 04/22/2022 | View / Edit Details | |
| Jeff Stenzel | Midwest | Wells | FS19 | 04/19/2022 | 7 | Housekeeping | EE were blowing sanding dust off the form | Completed | 04/19/2022 | View / Edit Details | |
| Steve Arndt | Midwest | Wells | FS19 | 04/26/2022 | 6 | Ergonomics | FS19 crew came out to the form and did not stretch before starting to flip up the tarp. | Completed | 04/27/2022 | View / Edit Details | |
| gerald asmus | Midwest | Wells | north end FS19 | 04/20/2022 | 5 | Unsafe Operation | employee opened safety chain between shop and FS19 and someone was going to walk through during tensioning form. | Completed | 04/20/2022 | View / Edit Details | |
| Rick Tolfa | Great Lakes | Waukesha - Machinery | Machine shop | 04/19/2022 | 4 | Housekeeping | Area was messy with several trip and slip hazards on the floor | Completed | 04/20/2022 | View / Edit Details | |
| gerald asmus | Midwest | Wells | west plant temporary bunkers | 04/19/2022 | 4 | Unsafe Operation | temp. retaining blocks not staggered. will tip over as soon as pressure is applied. | Completed | 04/19/2022 | View / Edit Details | |
| Tom Miller | Great Lakes | Valders - Production | Plant 2 Hollowcore | 04/19/2022 | 3 | Other | Stressing unit plug is damaged. Unit was used by wetcast and when returned found plug damaged. | Completed | 04/19/2022 | View / Edit Details | |
| gerald asmus | Midwest | Wells | fs26 | 04/19/2022 | 5 | Housekeeping | reminder to pickup as soon as possible after for form is stripped | Completed | 04/19/2022 | View / Edit Details | |
| Jeff Stenzel | Midwest | Wells | Fs25 | 04/19/2022 | 8 | Unsafe Operation | EE was using a grinder cutting expanded metal. He was using the opening in the piece as his table and the sparks were shooting down over tensioned strand in the bottom layer and the wood deck | Completed | 04/19/2022 | View / Edit Details | |
| Todd A Anderson | Midwest | Wells | FS-26 | 04/18/2022 | 4 | Unsafe Act | Cable not shielded on the south end of bed. | Completed | 04/19/2022 | View / Edit Details | |
| Brady Korn | Midwest | Wells | FS39 | 04/19/2022 | 5 | Unsafe Operation | FS39 strippers were loading a panel and not paying attention. Resulting in the panel hitting a trailer, causing damage to the form face of the panel. | Completed | 04/19/2022 | View / Edit Details | |
| Randy Neumeyer | Great Lakes | Valders - Production | Plant 1 | 04/19/2022 | 3 | Other | Bucket was placed in front of exit door. | Completed | 04/19/2022 | View / Edit Details | |
| Kevin Lesto | Midwest | Field | 7346 | 05/11/2022 | 9 | Unsafe Act | Is there any reason why these connections weren't on the top of the flat.. Luckily ew were able to find a lift.. 30' in the air off a ladder isn't only not any fun "it's not very safe". Being in a Creamery you have the problem 9f welding around Stainless Stell Equipment which adds a least twice the welding time because we normally have to take the time to cover the Stainless, and normally take 2 worker instead of 1. When the plate connection is on top its much more convenient for everyone involved and much safer | Needs Attention | View / Edit Details | ||
| Danielle Homeyer | Great Lakes | Valders - Production | Warehouse | 06/24/2022 | 4 | PPE | I took the gator from the warehouse to the front office and forgot to grab my vest. Before I headed back to the warehouse, I borrowed a vest from the front office. | Completed | 06/24/2022 | View / Edit Details | |
| gerald asmus | Midwest | Wells | DT10 - FS26 | 05/31/2022 | 6 | Housekeeping | NEED TO PICKUP AFTER STRIPPING FORMS AND SHARE THE WORK. | Completed | 05/31/2022 | View / Edit Details | |
| gerald asmus | Midwest | Wells | main plant | 05/18/2022 | 3 | PPE | employee no hi viz vest | Completed | 05/18/2022 | View / Edit Details | |
| gerald asmus | Midwest | Wells | west plant | 05/17/2022 | 6 | Housekeeping | employees are leaving scrap steel on the floor around chop saw. slip-trip hazard | Needs Attention | View / Edit Details | ||
| Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |