SEE Tracker Entries
Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |
---|---|---|---|---|---|---|---|---|---|---|---|
Matt Maguet | Midwest | Wells | FS26 | 04/22/2022 | 6 | Other | They started putting the incorrect burkes in to the panels. They were using the 6-ton lifters that do not have the "foot" on them. | Completed | 04/22/2022 | View / Edit Details | |
C.J. Meyer | Midwest | Wells | By the QC lab | 04/21/2022 | 7 | Unsafe Operation | Someone put a gas can in front of the electrical box, (Within the 3' that is supposed to be free and clear of anything) | Completed | 04/22/2022 | View / Edit Details | |
Jeff Stenzel | Midwest | Wells | FS19 | 04/19/2022 | 7 | Housekeeping | EE were blowing sanding dust off the form | Completed | 04/19/2022 | View / Edit Details | |
Danny Sheetz | Mountain States | West Division Plant | FB1 | 04/21/2022 | 12 | Housekeeping | Flammable aerosal cans were left out on the ground to be run over and left in plate baskets. | Needs Attention | View / Edit Details | ||
gerald asmus | Midwest | Wells | north end FS19 | 04/20/2022 | 5 | Unsafe Operation | employee opened safety chain between shop and FS19 and someone was going to walk through during tensioning form. | Completed | 04/20/2022 | View / Edit Details | |
Rick Tolfa | Great Lakes | Waukesha - Machinery | Machine shop | 04/19/2022 | 4 | Housekeeping | Area was messy with several trip and slip hazards on the floor | Completed | 04/20/2022 | View / Edit Details | |
gerald asmus | Midwest | Wells | west plant temporary bunkers | 04/19/2022 | 4 | Unsafe Operation | temp. retaining blocks not staggered. will tip over as soon as pressure is applied. | Completed | 04/19/2022 | View / Edit Details | |
Tom Miller | Great Lakes | Valders - Production | Plant 2 Hollowcore | 04/19/2022 | 3 | Other | Stressing unit plug is damaged. Unit was used by wetcast and when returned found plug damaged. | Completed | 04/19/2022 | View / Edit Details | |
gerald asmus | Midwest | Wells | fs26 | 04/19/2022 | 5 | Housekeeping | reminder to pickup as soon as possible after for form is stripped | Completed | 04/19/2022 | View / Edit Details | |
Jeff Stenzel | Midwest | Wells | Fs25 | 04/19/2022 | 8 | Unsafe Operation | EE was using a grinder cutting expanded metal. He was using the opening in the piece as his table and the sparks were shooting down over tensioned strand in the bottom layer and the wood deck | Completed | 04/19/2022 | View / Edit Details | |
Todd A Anderson | Midwest | Wells | FS-26 | 04/18/2022 | 4 | Unsafe Act | Cable not shielded on the south end of bed. | Completed | 04/19/2022 | View / Edit Details | |
Brady Korn | Midwest | Wells | FS39 | 04/19/2022 | 5 | Unsafe Operation | FS39 strippers were loading a panel and not paying attention. Resulting in the panel hitting a trailer, causing damage to the form face of the panel. | Completed | 04/19/2022 | View / Edit Details | |
Randy Neumeyer | Great Lakes | Valders - Production | Plant 1 | 04/19/2022 | 3 | Other | Bucket was placed in front of exit door. | Completed | 04/19/2022 | View / Edit Details | |
John Schnell | Great Lakes | Valders - Production | Plant 3 | 04/18/2022 | 8 | Unsafe Operation | Employee was bringing in a pallet of rebar in the west center door to place next to the bed for the next days production. While bringing the long bars in they had to lift the load high enough to clear the stressing guards on the west end of beds 2 and 3. Because there were 2 pump sprayers left in the center of the drive isle the forklift operator dismounted the forklift to move the sprayers so they could drive down the isle. When they dismounted the forklift they left the load about 9 feet high and partially walked under it to move the sprayers | Completed | 04/19/2022 | View / Edit Details | |
Ron Barnick | Midwest | Wells | Yard | 04/18/2022 | 0 | Safe Operation | Observed a yard truck driver driving around talking on his cell phone.. | Needs Attention | View / Edit Details | ||
Rob weiss | Midwest | Field | Green Bay Wi | 04/18/2022 | 12 | Unsafe Operation | Wells driver unchained load before he was in place to pick | Completed | 04/18/2022 | View / Edit Details | |
Joseph Moore | Mountain States | West Division Plant | Outside production | 04/14/2022 | 9 | Housekeeping | Mesh used for beds that was taken off the kart and was never cleaned up after cutting. Also left in front of a walkway. | Needs Attention | View / Edit Details | ||
C.J. Meyer | Midwest | Wells | In the plant by the breakroom door | 04/14/2022 | 7 | Unsafe Operation | There is a portable table saw and some vacuums in front of the fire extinguisher and eye wash station. | Needs Attention | View / Edit Details | ||
Jordan Johnson | Midwest | Wells | FS23 | 04/13/2022 | 7 | Other | The crew didn't have their cable shielded at the end of the form. | Completed | 04/14/2022 | View / Edit Details | |
Jacob Charles Randall | Midwest | Sealant | Walser Toyota Ramp | 04/13/2022 | 9 | Fall Hazard | Leading edge flag line keeps blowing over | Needs Attention | View / Edit Details | ||
Jon bodart | Great Lakes | Valders - Production | bed 1 | 04/12/2022 | 6 | Housekeeping | dust pile at end of bulkhead was not vacuumed up, when detentionng the dust ignited from the torch | Completed | 04/12/2022 | View / Edit Details | |
Marc stayner | Great Lakes | Valders - Production | Parking lot | 04/11/2022 | 3 | Unsafe Operation | An employee parked his car In The middle of the parking lot where he could possibly be hit. | Completed | 04/12/2022 | View / Edit Details | |
Marc stayner | Great Lakes | Valders - Production | Bar shop | 04/11/2022 | 0 | Safe Operation | The housekeeping in the bar shop was very good yesterday. | Completed | 04/12/2022 | View / Edit Details | |
Marc stayner | Great Lakes | Valders - Production | Bar shop | 04/11/2022 | 6 | PPE | Employee was using a cutting torch without a face shield. | Completed | 04/12/2022 | View / Edit Details | |
Wayne W Wallander | Great Lakes | Valders - Field | Green Bay, Wisconsin | 04/11/2022 | 4 | Unsafe Operation | Pc shifted on load during rotation to vertical damaging forklift coant reserve tank, truck unable to align with crane after crane move. Tag line tie off will be used until conditions improve | Completed | 04/11/2022 | View / Edit Details | |
Name | Location | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |